- FEATUREPorcelain Tile
- size60X120 - 24”X48”, 60x60 - 24”X24”
- FINISHPOLISH /MATT
- USAGEWall /Floor /Residential /Commercial /Light Traffic Area
Project Solution Capability:
graphic design, 3D model design, total solution for projects
Design Style: Modern
Surface Finishing: Polished
Application: Hotel, Living Room
Stone Name: white marble
Model Number: white marble floor tile
20000 Square Meter/Square Meters per Day Non-slip rustic porcelain tile
Packaging & Delivery
NATURAL OR INHERENT MARBLE PROBLEMS
Marble subjected to exterior exposures deteriorates due to weathering or the natural effects of wind, rain, and thermal change. Marble is extremely durable, and because of its limited porosity does not absorb large amounts of water. It does, however, absorb some water and, since it is highly reactive when exposed to acids or even mildly acidic rainwater, it can suffer substantial deterioration. In short, while the porosity of marble is low, the shape of the pores (elliptical) allows greater dissolution than in typical round pores, and this fact coupled with marble’s inherent solubility in acids can result in two major problems:
LOSS OF POLISH
The most common symptoms of weathering are a loss of the highly polished surface (where it exists) and loss of crisp edge details in decorative carved areas of the stone.
Little can be done to restore edge detailing short of re-carving the stone which is usually infeasible. The gloss or polish can be maintained and, to some degree, restored on the surface of marble by using marble polishing powder and soft buffing pads. The level of effort or labour required to repolish stone will depend upon the degree of deterioration of the surface, or loss of polish. New pieces, restored pieces or well-maintained surfaces can be retained in a highly polished state with much less effort than surfaces which have been exposed to weathering for long periods of time with little or no maintenance. For this reason, polished marble should receive regular preventive maintenance by polishing.
Having a hard time polishing stone? buy stone polishing tools we got you covered.
Erosion can be the result of general weathering described above, or it can be a more localised phenomenon based upon handling or exposure. Wind-driven, airborne abrasives such as dirt, grit, and other “particles” may selectively wear away detailing. The effects will depend largely upon the direction of prevailing winds. One of the few effective ways to address this problem is by landscaping where plantings and/or landscape grade can deflect the wind. Such landscaping and/or grading may range from the simple and inexpensive to a major and expensive intervention. It would have to be consistent with the policy for the management of cultural landscapes. It may, however, be cost-effective when considering the extended life of the building.
The symptoms of erosion can be as simple as the general loss of polish and edge sharpness as described above, or it can be very localised, specific wear due to contact with landscaping and mowing equipment. Localised damage due to contact by mowing or other maintenance equipment is preventable. Where there is evidence of recurrent physical damage, steps should be taken to protect the stone.
Contigo Ceramics is part of Jinyi Group, the world leader in the production of ceramic and porcelain tiles for residential, retail and industrial projects. 25 years’experience and present in almost 100 countries worldwide,operating in accordance with firmly-consolidated values of innovation and quality.By having the creations of brilliant R&D,and advantages of production in the famous town of ceramics,Nanzhuang,Contigo Ceramics has evolved to a global manufacturer and distributor for design solutions.
Contigo Ceramics, a fashion lifestyle brand that will make your project dream design a reality.
Trademarks & Certificates
Packing & Delivery
1. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2.When can you deliver the goods?
Within Deposit ,7 days for stock items ,20-25 days for production.
3. What's your MOQ?
For stock items, no MOQ requirement, for OEM items, 0.5 container/item.
4.Samples is available?
A:Free sample is available ,customers need to pay the courier charge ,this charge can be deducted from the PI value of confirmed order.
5.How do I know your quality?
High solution detailed photos and free sample will be able to verify our quality.
6.Are you a trading company or factory?
We're factory. We manufacture products ourselves.
7. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: PayPal,L/C,T/T;